Cleaning And Maintenance; Cleaning Dispensing Unit; Filter-Holders - Faema Enova S Gebrauch Und Installation

16. Cleaning and maintenance

For correct application of the food safety system (HACCP), please follow the instructions in this
Washing must be carried out using original "Service Line" products, see details on the last page. Any
other product could make the materials in contact with food unsuitable.

CLEANING DISPENSING UNIT -

1
Remove the filter holder
from the coffee group.
5
dispenser unit.

FILTER-HOLDERS -

1
Put a liter of cold water in a
suitable container and add
detergent.
4
Remove any residue with a sponge and rinse well with
cold water.
2
Using a brush, clean the
cover gasket.
6
Press the coffee dispensing
button and press it again
after 10 seconds. Repeat
this step 10 times.
2
3
Insert the rubber disk into
7
Remove the filter holder;
Press the coffee dispensing
button and execute the rinse
cycle with water for about
30".
5
A
the anchoring spring (A
12 EN
paragraph.
4
Pour in a packet or dosing
cupful of detergent powder.
3
Soak the filters and the
for about 2 hours.