Pnp/Pci Configurations - Abit IC7-G Schnellinstallationsanleitung

3-20 Chapter 3

3-7. PnP/PCI Configurations

Force Update ESCD:
When set to [Enabled], the BIOS will reset the ESCD (Extended System Configuration Data) once
automatically next time you boot up. It will then recreate a new set of configuration data. But the next
time you boot up, this option will automatically be set as Disabled.
NOTE: The ESCD (Extended System Configuration Data) contains the IRQ, DMA, I/O port, memory
information of the system. This is a specification and a feature specific to the Plug & Play BIOS.
Resources Controlled By:
This item configures all of the boot and Plug-and-Play compatible devices.
[Auto(ESCD)]: The system will automatically detect the settings.
[Manual]: Choose the specific IRQ resources in the "IRQ Resources" menu.
IRQ Resources:
Click <Enter> key to enter its submenu:
This item sets each system interrupt to either [PCI Device] or [Reserved].
IC7-G