Inhaltsverzeichnis
Werbung
2.7 PnP/PCI Configurations
Resources Controlled By
x IRQ Resources
PCI/VGA Pallete Snoop
Assign IRQ For VGA
PCI Latency Timer(CLK)
***** PCIe relative items *****
Maximum Payload Size
F5: Previous Values
Resources Controlled By
This item configures all of the boot and Plug-and-Play compatible devices.
[Auto(ESCD)]: The system will automatically detect the settings.
[Manual]: Choose the specific IRQ resources in the "IRQ Resources" menu.
IRQ Resources
Click <Enter> key to enter its submenu:
This item sets each system interrupt to either [PCI Device] or [Reserved].
PCI/VGA Palette Snoop
This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not.
[Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA.
[Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA.
Assign IRQ for VGA
This item assigns an IRQ for the VGA card installed.
[Enabled]: Automatically assign an IRQ for the VGA card installed.
[Disabled]: The IRQ that was previously occupied by the VGA card will be available for new
device.
PCI Latency Timer(CLK)
This item controls how long each PCI device can hold the bus before another takes over. When
set to higher values, every PCI device can conduct transactions for a longer time and thus
improve the effective PCI bandwidth. For better PCI performance, you should set the item to
higher values.
Maximum Payload Size
This item sets the maximum TLP payload size for the PCI Express devices.
2-16
Downloaded from
www.Manualslib.com
Phoenix – AwardBIOS CMOS Setup Utility
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F6: Fail-Safe Defaults
manuals search engine
PnP/PCI Configurations
Auto(ESCD)
Press Enter
Disbaled
Enabled
64
4096
Item Help
F7: Optimized Defaults
A-S78H
Werbung
Inhaltsverzeichnis
