Field Of Application - SFA SANICUBIC 2 SC Betriebsanleitung

Type
SANICUBIC 1 SC3.0 T
®
SANICUBIC 1 SC4.0 T
®
SANICUBIC 1 SC5.5 T
®
SANICUBIC 1 SC7.5 T
®
Maximum media temperature: 55°C
Double systems:
Type
SANICUBIC 2 SC3.0 T
®
SANICUBIC 2 SC4.0 T
®
SANICUBIC 2 SC5.5 T
®
SANICUBIC 2 SC7.5 T
®
Type
SANICUBIC 2 SC3.0 T
®
SANICUBIC 2 SC4.0 T
®
SANICUBIC 2 SC5.5 T
®
SANICUBIC 1 SC7.5 T
®
Maximum media temperature: 55°C
Materials
Shaft sealing
Tank
Seel carrier
Impeller
Screws

2.4 Field of application

The sewage lifting units of the series SANICUBIC
domestic and industrial dirt water and wastewater, which occur below the sewer backwater level.
Double systems are used everywhere, where an interruption of the sewage disposal must not occur
according to DIN 1986.
The sewage lifting units of the series SANICUBIC
containing substances which attack or damage the materials of the pump or of the collecting
tank.
Operating Limits :
• The lifting unit is not designed for continuous operation! The conveying data stated on the
Gross Switching
volume volume connection
[l] [l]
480 270 DN 150
480 270 DN 150
480 270 DN 150
480 270 DN 150
Input Nominal Voltage
Power Power U [V]
P1 [kW] P2 [kW]
4.0 3.0 400
5.5 4.0 400
6.3 5.5 400
8.7 7.5 400
Gross Switching
volume volume connection
[l] [l]
1000 500 DN 150
1000 500 DN 150
1000 500 DN 150
1000 500 DN 150
Motor side
Pump-side
PE HD
Cast iron
Cast iron
Steel, galvanized
Inlet Free Weight
passage [kg]
[mm]
80 210
80 220
100 225
100 240
Rated Speed
current (50 Hz)
I [A] [min ]
-1
MAX
6.9 1400
11.2 1400
12.1 1400
16.9 1400
Inlet Free Weight
passage [kg]
[mm]
80 370
80 385
100 400
100 425
Shaft seal
up to 4 kW mechanical seal, from 5.5 kW
chilled casting seal
Pump housing
Sealing materials
Impeller nut
SC serve to dispose of (collecting and conveying)
®
SC must not be used to convey waste waters
®
Dimensions Minimum
[mm] space
requirement
[m]
Ø1000 2x1.5
Ø1000 2x1.5
Ø1000 2x1.5
Ø1000 2x1.5
Feed Pumping Pressure
volume head connection
[m /h] [m]
3
120 10 DN 100
140 13 DN 100
160 18 DN 100
165 22 DN 100
Dimensions Minimum
[mm] space
requirement
[m]
1450x950 2.5x1.5
1450x950 2.5x1.5
1450x950 2.5x1.5
1450x950 2.5x1.5
Cast iron
NBR
Stainless steel
7