Colour System - JVC AV29A10EU Bedienungsanleitung

AV29A10EU_Eng.book Page 17 Tuesday, July 31, 2001 4:14 PM

COLOUR SYSTEM

COLOUR SYSTEM
COLOUR SYSTEM COLOUR SYSTEM
I I I I
The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
system manually.
Press the 6 buttons to choose COLOUR
1
SYSTEM. Then press the
The Sub-menu of the COLOUR SYSTEM function ap-
pears.
COLOUR SYSTEM
PAL
BACK
TV OK
D0016-EN
Press the 5 buttons to choose the ap-
2
propriate colour system.
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input sig-
nal. Only when you are viewing a picture from Pro-
gramme number PR 0 (AV), or EXT terminal, you can
choose using the AUTO function.
a
3
Press the button to complete the set-
ting.
The menu disappears.
Note:
• The AUTO function may not function properly if you
have poor signal quality. If the picture is abnormal in
the AUTO function, choose another colour system
manually.
• When in the Programme numbers PR 0 (AV) to PR
99, you cannot choose NTSC 3.58 or NTSC 4.43.
a
button.
AV29A10EU / LCT0984-001A-U / English
PICTURE FEATURES
17