JVC AV29A10EU Bedienungsanleitung Seite 5

AV29A10EU_Eng.book Page 4 Tuesday, July 31, 2001 4:14 PM
PREPARATION
5
Press the blue button to start the
AUTO PROGRAM function.
The AUTO PROGRAM menu appears and received TV
channels are automatically registered in the Programme
numbers (PR).
AUTO PROGRAM
CH 10
20%
BACK
TV OK
D0004-EN
If "ACI START/ACI SKIP" appears in the AUTO PRO-
GRAM menu:
You can use the ACI (Automatic Channel Installation)
function to decode the ACI data and complete the regis-
tration of all the TV channels in a short period of time.
For details of the ACI function and how to use it, refer to
"Using the ACI function" on page 28.
If you don't want to use the ACI function, press the 6
button to choose ACI SKIP and then press
To cancel the AUTO PROGRAM function:
b
Press the button.
6
After the TV channels have been
registered in the Programme num-
bers (PR), the EDIT menu appears.
You can proceed to edit the Programme numbers (PR)
using the EDIT/MANUAL function. For details, see "ED-
IT/MANUAL" on page 24.
When not using the EDIT/MANUAL function:
If you do not need to use the EDIT/MANUAL function, go
to the next step.
a
7
Press the
T-V LINK menu.
T-V LINK
DOWNLOAD TV VCR
BACK
TV OK
EXIT
D0005-EN
8
Operate the T-V LINK menu accord-
ing to the type of a VCR connected
to the EXT-2 terminal.
When a T-V LINK compatible VCR is not con-
nected:
b
Press the button to exit the T-V LINK menu.
The T-V LINK menu disappears.
When a T-V LINK compatible VCR is connected:
Follow the operating procedure "Downloading the data
to VCR" on page 28 to transmit the Programme number
(PR) data.
4
EDIT
PR ID CH / CC
AV
01
BBC1 CH 21
02
CH 22
03
CH 23
04 CH 24
05 CH 25
06 CH 26
07 CC 01
08 CC 02
09 CC 03
ID
BACK
INSERT
TV OK
MOVE DELETE
MANUAL
a
.
button to display the
AV29A10EU / LCT0984-001A-U / English
9
Now, the initial settings are com-
plete, and you can watch the TV.
Note:
• When your TV can detect the TV channel name from
the TV channel broadcast signal, it automatically
registers the TV channel name (ID) to the Pro-
gramme number (PR) in which the TV channel has
been registered.
• If a TV channel you want to view is not set to a Pro-
gramme number (PR), manually set it using the
MANUAL function. For details, see "EDIT/MANUAL"
on page 24.
• The TV channel is not registered in Programme
number PR 0 (AV). When you want to register a TV
channel to PR 0 (AV), manually set it using the MAN-
UAL function. For details, see "EDIT/MANUAL" on
page 24.