Picture Features; Colour System; Digital Vnr - JVC Natural Vision T-V LINK AV28CH1EU Bedienungsanleitung

PICTURE FEATURES

PICTURE FEATURES PICTURE FEATURES PICTURE FEATURES
PICTURE FEATURES

DIGITAL VNR

COLOUR SYSTEM

4:3 AUTO ASPECT
BACK
TV OK
D0015-EN
To display the PICTURE FEATURES menu:
1
Press the
(main menu).
Press the 6 button to choose PICTURE
2
FEATURES, and press the
DIGITAL VNR DIGITAL VNR DIGITAL VNR DIGITAL VNR
I I I I
The DIGITAL VNR function cuts down the amount of noise in
the original picture.
You can choose from the three DIGITAL VNR function set-
tings of AUTO, MIN and MAX.
Note:
• If you set the DIGITAL VNR effect too high it can make the
picture less sharp. It is recommended to use the AUTO
setting if you can.
Press the 6 buttons to choose DIGITAL
1
VNR.
Press the 5 buttons to choose a setting.
2
AUTO:
The TV will automatically adjust the level of the DIGITAL
VNR effect to match the amount of noise in the picture,
giving you the best possible picture.
MIN:
The level of the DIGITAL VNR effect is set to the mini-
mum. If you set the DIGITAL VNR function to AUTO but
feel that the sharpness of the original picture has not
been reproduced fully, change the setting from AUTO to
MIN.
• The MIN setting is not suitable for low-quality pictures
which contain a lot of noise.
MAX:
The level of the DIGITAL VNR effect is set to the maxi-
mum. If you set the DIGITAL VNR function to AUTO but
still notice some noise, change the setting from AUTO to
MAX.
• The MAX setting is not suitable for high-quality pictures
which contain very little noise.
3
Press the
ting.
The menu disappears.
16
Downloaded from www.Manualslib.com
AUTO
a
button to display MENU
a
button.
a
button to complete the set-
manuals search engine
COLOUR SYSTEM COLOUR SYSTEM COLOUR SYSTEM COLOUR SYSTEM
I I I I
The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
system manually.
Press the 6 buttons to choose COLOUR
1
SYSTEM. Then press the
The Sub-menu of the COLOUR SYSTEM function ap-
pears.
COLOUR SYSTEM
PAL
BACK
TV OK
D0016-EN
Press the 5 buttons to choose the ap-
2
propriate colour system.
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input sig-
nal. Only when you are viewing a picture from Pro-
gramme number PR 0 (AV), or EXT terminal, you can
choose using the AUTO function.
a
3
Press the button to complete the set-
ting.
The menu disappears.
Note:
• The AUTO function may not function properly if you
have poor signal quality. If the picture is abnormal in
the AUTO function, choose another colour system
manually.
• When in the Programme numbers PR 0 (AV) to PR
99, you cannot choose NTSC 3.58 or NTSC 4.43.
a
button.