Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.4.6
When used in this mode, the air conditioner only
Dehumidifier only
eliminates the humidity in the room, practically without
changing the temperature.
This function can be extremely useful between
seasons, particularly on rainy days when the tempe-
rature is not uncomfortable but the excess humidity
feels unpleasant.
When used in this mode, the air conditioner ignores
the temperature and fan speed settings, which are
not shown on the display in this case.
To operate the air conditioner in this mode, press
Button T4 until the droplet symbol appears on the
display with automatic ventilation.
In this operating mode it is normal for the air
conditioner to function intermittently.
3.4.7
When used in the mode the air conditioner does not act
Fan only
on the either the temperature or the humidity in the room,
but only keeps the air in circulation.
This operating mode is selected by pressing button T4
until the fan symbol appears on the display.
At this stage you can select the fan speed (see
paragraph 3.4.10).
3.4.8
When used in this mode the air conditioner heats the
Heating function
room. This function is only available on models with a
(only models with
heating pump (HP).
heat pump)
To select this mode press button T4 (operating mode
selection switch) until the sun symbol appears on the
display. First set the desired temperature and fan speed
(see the specific paragraphs). After three minutes
(maximum time) the compressor should start and the air
conditioner starts heating the room. When the compressor
starts you will see a green LED light up on the control
panel.
Note: The air conditioner has to defrost its battery
periodically (about once every half hour). During this
operation (about 3-8 minutes) the air conditioner does
not heat the room, though its internal parts remain
on except for the room air fan. When the outdoor tem-
perature is very low, there may be a slight delay (about
three minutes) for passage from the minimum to the
medium or maximum speed from when the command
is sent to the machine with the remote control.
3.4.9
The airflow can be controlled in both its horizontal and
Control of air flow
vertical direction. Control of the horizontal direction cannot
direction
be carried out with the remote control and must be made
manually by adjusting the position of the fins on the outlet
opening.
IMPORTANT: Adjustment of horizontal airflow should
only be made when the movable grating is not m
oving.
42
AUTO
T4
Fig. 31
Dehumidifier only
T4
Fig. 32
Fan only
AUTO
T4
Fig. 33
Heating function (only models with heat pump)
Fig. 34
Control of air flow direction
+
F
S
A
E
N
T
-
+
F
S
A
E
N
T
-
+
F
S
A
E
N
T
-
UNICO-HE
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
