Storage; Disposal; Packaging; Troubleshooting - Silvercrest SDA 350 A2 Bedienungsanleitung

10. Storage

DANGER for children!
Keep the device out of the reach of chil-
dren.
• Clean all parts and make sure they are
properly dry before putting away the
device.
• Select a location where neither high
temperatures nor moisture can affect the
device.

11. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
64 GB

12. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault
• Has the device been
No function
• Check the connection.
The device can- • Has the drying time
not be started
with the
button 17.
The device • This device is provided
switches off
automatically
and cannot be
switched on
again.
Possible causes /
Action
connected to the pow-
er supply?
00 Hr been set? Set a
drying time between 1
and 48 hours.
with an overheating
protection. In case of
overheating, it will
switch the device off.
Contact the Service
Centre.