Safety Information; Risk Of Electric Shock - Silvercrest SIKP 2000 E2 Bedienungsanleitung

Safety information

RISK OF ELECTRIC SHOCK

Ensure that the power cable never becomes wet or damp
►
when the appliance is in use. Route the cable so that it
cannot be trapped or damaged in any way.
Ensure that the mains plug is connected exclusively to a
►
properly installed, easily accessible mains socket that has
a voltage corresponding to the specifications on the rating
plate. The mains socket must remain easily accessible even
following connection.
After use, always disconnect the plug from the mains power
►
socket. When doing so, always take hold of the plug, not the
mains cable.
Just switching off the appliance is not sufficient, as the appli-
►
ance is subject to mains voltage as long as the plug is con-
nected to the mains power socket.
Protect the hob from damage: Do not load it unevenly and
►
do not allow objects to fall onto it. Do not continue to use
the appliance if either the hob or the housing is damaged. If
this is the case, immediately remove the plug from the mains
power socket and arrange for the appliance to be repaired.
Arrange for defective power plugs and/or cables to be
►
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury.
If the surface of the hob is cracked, disconnect the plug from
►
the mains power socket to avoid receiving an electric shock.
Ensure that the appliance, the power cable and the
power plug are never immersed in water or other fluids.
SIKP 2000 E2
41 ■
GB│MT
│