Optional quick release headrest (CPR)
The quick release headrest is optional and is not installed as standard on all beds. The quick
release handle is placed under the mattress support frame on the right hand side and is marked
with this symbol:
Use
Pull out the safety pin (downwards) and then pull the red handle outwards until the backrest
is down.
Be aware, the backrest comes down fast. Do not reach under the backrest as
there is risk of entrapment!
There is a risk of head injury if the patients head hits the bedend
The sudden movement of the backrest can cause spinal injury or cause wounds
to open.
When the handle has been pushed completely back and the safety pin replaced,
the backrest motor will work normally again.
Before use
In cases where beds with CPR function are considered, be aware that the bed should be placed
so there is free access to the release handle on the right side of the bed.
It is recommended the caregiver makes themselves familiar with using the CPR function
UM_1518190_GB_DK_SE_NO_FI_DE_NL_FR_IT_PT_ver06.indd 33
CPR
33
2011-11-08 15:25:35