Invacare ScanBed 755 Bedienungsanleitung Seite 24

8. Lift the head section to horizontal, and push
it over the inserts to stop.
9. Push down the seat section, so the head and
leg sections lock together.
10. Connect the plugs from the backrest, thigh
and leg section motors onto the control unit
(refer to section 7 - Wiring), then attach the
locking cam into place.
11. Mount the accessories.
Adjusting misaligned platform tubes
In the event that the side tubes are misaligned in the assembly, the inserts can be adjusted for
better fit.
1. Slide the side tubes apart.
2. Use a large screwdriver to flip the little tongue 1-2mm.
3. Slide the side tubes along. Verify that the side tubes aligned.
1.
UM_1518190_GB_DK_SE_NO_FI_DE_NL_FR_IT_PT_ver06.indd 27
8.
9.
2.
27
3.
2011-11-08 15:25:28