Invacare ScanBed 755 Bedienungsanleitung Seite 18

Fitting the lifting pole
Remove the plastic stopper
in the lifting pole tube in which
the lifting pole is to be mounted.
Mount the lifting pole
- the finger screw must be used.
Mounting the backup battery
The bow containing the batteries must be
installed on the bed´s base next to the
control unit, and the cable connected to
the control unit. The batteries are charged
as long as the control unit is connected
to the mains, and will ensure that the bed
can be adjusted during a power failure or
transport.
Fitting the bumper wheels on Emma bed ends
Mount the bushing in the bumper wheel, and fasten the bumper wheel with a screw into
the bed end. Bumper wheels can not be mounted onto other bed ends.
UM_1518190_GB_DK_SE_NO_FI_DE_NL_FR_IT_PT_ver06.indd 21
Lifting pole tube with
plastic stopper
Finger screw
21
2011-11-08 15:24:07