➍ Shooting Images; Adjusting The Size; Adjusting The Brightness; Adjustimg The Focus - Elmo MX-1 Bedienungsanleitung

➍ SHOOTING IMAGES

■ADJUSTING THE SIZE

The image size can be adjusted using [
Zoom mode (LED: blue/green). If the MX-1 is in the Brightness adjustment mode (LED:
purple), change the mode to the Zoom mode.
Note
The maximum zoom ration is 8x (digital zoom).
The image quality will be degraded when using the digital zoom.

■ADJUSTING THE BRIGHTNESS

The brightness of the image can be adjusted using [
panel in the Brightness adjustment mode (LED: purple). The brightness does not change
automatically according to the brightness of the shooting environment. If the MX-1 is in the
Zoom mode (LED: blue/green), change the mode to the Brightness adjustment mode.

■ADJUSTIMG THE FOCUS

日
Press the
本
語

■PAUSING THE IMAGE

Press the
function can be used in both the Zoom mode and Brightness adjustment mode.)

■ROTATING THE IMAGE

The image rotates by 180°by pressing the
(This function can be used in both the Zoom mode and Brightness adjustment mode.)

■TURNING THE LED LIGHTING ON/OFF

The LED lighting can be turned ON/OFF by pressing
the Zoom mode (LED: blue/green). If the MX-1 is in the Brightness adjustment mode (LED:
purple), change the mode to the Zoom mode.
Caution
• To take shots of people, turn the LED lighting OFF.
• Make sure that the light from the LED lighting does not shine directly into your eyes.
• This product is equipped with a high-brightness LED. You can safely use it to light up
the object. The brightness will gradually decrease with long-term use. This is not a
malfunction but a characteristic of the LED.
• Do not touch the LED lighting while it is on as it may become very hot.
button on the Operating panel to automatically focus on an object.
button to pause the camera image. Press the button again to restart. (This
/ ] buttons on the Operating panel in the
/ ] buttons on the Operating
button on the Operating panel.
button on the Operating panel in
P.33
40
P.33
P.33
P.33
P.33
P.33