Technical Data; Dimensions - WACKER BS65Y Betriebsanleitung/Ersatzteilliste

BS65Y
1.5

Technical Data

Engine speed - full
Engine speed - idle
Clutch engagement
Cylinder head compression-cold
Spark plug - Gap
Engine Lubrication
Ramming System Lubrication
Sound and Vibration Measurements
The required sound specifications, per Appendix 1, Paragraph 1.7.4.f of the EC-Machine Regulations, are:
- the sound pressure level at operator's location (L
the sound power level (L
-
These sound values were determined according to ISO 3744 for the sound power level (L
pressure level (L ) at the operator's location.
pA
The weighted effective acceleration value, determined according to ISO 8662 Part 1, is 10
The sound and vibration measurements were obtained with the machine operating on crushed gravel at nominal engine
speed.
1.6

Dimensions

in. (mm)
rpm
rpm
rpm
2
psi (kg/cm )
in. (mm)
Two-cycle or outboard motor oil conforming to BIA-TC-W
oil grade
oil grade
oz. (ml)
) = 104 dB(A)
WA
28 (710)
27 (685)
1014SD89
4500 ± 200
1500 ± 100
2800 ± 100
120–140 (8.0–9.7)
Champion RL86C: 0.035 (0.8–0.9)
Bosch WR 8 AC: 0.02 (0.5)
P/N 48333
specifications - ratio 50:1
Note: Use 25:1 for first tank of fuel.
SAE 30
25 (750)
) = 93
dB(A)
pA
37
(940)
OPERATION
) and ISO 6081 for the sound
WA
2 .
m/s
14 (360)
11 (280)
13 (330)
1A
1A-5