Operating Safety - WACKER BS65Y Betriebsanleitung/Ersatzteilliste

BS65Y
1.2

Operating Safety

Familiarity and proper training are required for the safe operation of equipment! Equipment operated improperly or
by untrained personnel can be dangerous! Read the operating instructions and familiarize yourself with the
location and proper use of all instruments and controls. Inexperienced operators should receive instruction from
someone familiar with the equipment before being allowed to operate the rammer.
NEVER operate rammer in applications for which it
is not intended.
NEVER allow improperly trained personnel to oper-
ate rammer.
NEVER use choke to stop engine.
NEVER touch hot muffler, engine cylinders, or
cooling fins. Burns will result.
NEVER use accessories or attachments which are
not recommended by WACKER for rammer. Dam-
age to rammer and/or injury to user may result.
NEVER leave a running machine unattended.
ALWAYS read, understand, and follow procedures
in Operator's Manual before attempting to operate
equipment.
ALWAYS be sure operator is familiar with proper
safety precautions and operation techniques be-
fore using rammer.
!
WARNING
ALWAYS wear protective clothing when operating
rammer. For instance, goggles or safety glasses will
protect against eye damage caused by flying debris,
and wearing safety shoes will reduce the chance of
foot injuries.
ALWAYS keep hands, feet, and loose clothing away
from moving parts of rammer.
ALWAYS use common sense and caution when
operating rammer.
ALWAYS be sure rammer will not tip over, roll, slide,
or fall when not being operated.
ALWAYS turn engine OFF when rammer is not being
operated.
ALWAYS close fuel valve when rammer is not being
operated.
ALWAYS remove or disconnect engine spark plug
before servicing rammer, to avoid accidental start-up.
OPERATION 1A
1A-3