Invacare Aquatec ORCA series Gebrauchsanweisung Seite 11

1. Place the seat B on the bottom of the empty bathtub. Ensure
that the spindle foot retainer C is pointing towards the end
of the bathtub opposite the drain A.
2. Fold the side flaps of the seat outwards.
1574469-A
3. Place the backrest A (without the hand control) onto the
seat so that the hooks B of the backrest fit into the hinges
C of the seat plate D.
IMPORTANT!
Risk of damage
Damage to the product caused by the spindle foot
slipping out.
– Ensure that the spindle is fully retracted and the
spindle foot is level and not twisted, before folding
up the backrest.
– Once the backrest is folded up, ensure that the spindle
foot is in the spindle foot retainer.
Setup
11