Toshiba RAS-M10GDCV-E Betriebsanleitung Seite 9

• Remote control batteries
- Insert with the polarity signs (+ and –) in the correction orientation.
- Do not recharge.
- Do not leave batteries in the remote control that have exceeded the recommended usage period displayed on the battery or that are
used up.
- Do not mix different types of batteries or old and new batteries.
- Do not solder directly on the batteries.
- Do not short-circuit, disassemble, heat, or put the batteries in a fire.
Failure to observe these points can cause the fluid to leak or the battery to crack open, resulting in a burn or injury.
If you come into contact with the battery fluid, wash it off thoroughly with water. If it has spilled on a device, wipe off the fluid without
directly touching it.
Keep the batteries in a location out of the reach of small children. If a battery is swallowed by a small child, immediately contact a
physician.
3 EN