Auto Restart Function - Toshiba RAS-M10GDCV-E Betriebsanleitung

AUTO RESTART FUNCTION

This unit is equipped with an Automatic restarting function which allows the unit to restart and resume the set operating conditions in
the event of a supply power shutdown without the use of the remote controller.
The operation will resume without warning three minutes after the power is restored.
INFORMATION INFORMATION
The AUTO RESTART FUNCTION is not set to work on shipment from the factory, and so it is necessary to set it to function as
required.
HOW TO SET THE AUTO RESTART
To set the auto restart function, proceed as follows:
OPERATION
Slide the slide switch to AUTO RESTART ON side.
• The Auto Restart function will not accept an instruction if timer operation with the remote controller is selected. (Please refer to the
section of setting the timer operation.)
HOW TO CANCEL THE AUTO RESTART
To cancel the AUTO RESTART function, proceed as follows:
The system will now be required to manually restart with the remote controller after the main supply is returned.
OPERATION
Slide the slide switch to AUTO RESTART OFF side.
When you set to "ON" position of Auto restart, Pi Pi Pi sound
(3 times) appears. (During power supply to the unit)
When power supplying return, system will be restarted
automatically.
When you set to "OFF" position of Auto restart, Pi Pi Pi sound
(3 times) appears. (During power supply to the unit)
When power supplying return, system will not be restarted
automatically.
15
MOTION
MOTION
EN