Instructions And Safety Information - Wilo Drain MTC 32F Serie Einbau- Und Betriebsanleitung

SAFETY
1.8.2. Warranty period
If no other provisions have been made, the
warranty period covers the first 12 months after
initial start-up or up to 18 months after the
delivery date. Other agreements must be made in
writing in the order confirmation. These remain
valid at least until the agreed warranty period of
the product has expired.
1.8.3. Spare parts, add-ons and modifications
Only genuine spare parts from the manufacturer
may be used for repairs, replacements, add-ons
and modifications. These are the only parts that
guarantee a long service life and maximum safety.
These parts have been specially designed for our
products. Unauthorized add-ons and modifica-
tions or the use of non-original spare parts can
seriously damage the product and injure person-
nel.
1.8.4. Maintenance
The prescribed maintenance and inspection
work should be carried out regularly. This work
may only be carried out by qualified, trained and
authorized personnel. Maintenance not listed in
this operation and maintenance manual, and any
type of repair work, may only be performed by the
manufacturer and authorized service centers.
1.8.5. Damage to the product
Damage and malfunctions that endanger safety
must be eliminated immediately by trained
personnel. The product may only be operated if
it is in proper working order. During the agreed
warranty period, the product may only be repaired
by the manufacturer or an authorized service
center. The manufacturer reserves the right to ask
the operator to return the damaged product to
the factory for inspection.
1.8.6. Exclusion from liability
No liability will be assumed for product damage if
any of the following items apply:
• The manufacturer deems that information pro-
vided by the operator or customer is insufficient
or incorrect
• Failure to observe the safety instructions, the
regulations and requirements of German law or
the applicable local laws, or of this operating and
maintenance manual
• Improper use
• Incorrect storage and transport
• Improper assembly or dismantling
• Insufficient maintenance
• Unqualified repairs
• Inadequate construction site or construction work
• Chemical, electrochemical and electrical influ-
ences
• Wear
This means the manufacturer's liability excludes
all liability for personal, material or financial injury.
Installation and operating instructions Wilo-Drain MTC 32
2. Safety
This section lists all the generally applicable safe-
ty instructions and technical information. Fur-
thermore, all the other sections contain specific
safety instructions and technical information. All
instructions and information must be observed
and followed during every phase of the product's
life cycle (installation, operation, maintenance,
transport etc.). The operator is responsible for
ensuring that personnel follow these instructions
and guidelines.

2.1. Instructions and safety information

This manual uses instructions and safety informa-
tion to prevent injury and damage to property. To
clearly identify them for personnel, the instruc-
tions and safety information are distinguished as
follows:
2.1.1. Instructions
Instructions are displayed in bold type. Instruc-
tions contain text that refers to the previous
text or particular sections, or highlights short
instructions.
Example:
Note that products stored with drinking water
must be protected from frost.
2.1.2. Safety information
Safety information is slightly indented and dis-
played in bold type. It always commences with a
signal word.
Information that only refers to material damage is
printed in gray, without safety symbols.
Information that refers to personal injury is
printed in black and is always accompanied by a
safety symbol. Danger, prohibition or instruction
symbols are used as safety symbols.
Example:
Danger symbol: General hazard
Danger symbol, for example, electrical current
Prohibition symbol, for example, Keep out!
Instruction symbol, for example, wear protec-
tive clothing
The safety symbols used conform to the generally
applicable directives and regulations, such as DIN
and ANSI.
Each safety instruction begins with one of the
following signal words:
• Danger
This can result in serious or fatal injuries!
English
31