Operating The Blender - Vitek VT-1461 Betriebsanweisung

ENGLISH
• Do not put the attachment in a dish wash
machine.

OPERATING THE BLENDER

WARNING: before assembling make sure
that the unit is not plugged in.
• Insert the attachment (4) into the motor
unit (3), and turn it clockwise until bump-
ing.
• Insert the plug into the socket. The blend-
er is ready to be used.
• Immerse the blender attachment (4) into
the bowl with the products, which you
want to cut/mix, or use the bowl (6).
• When using the bowl (6) always use the
anti-slip support (5), which can be used
as the bowl lid (6).
Note: Put the products into the bowl for
cutting/mixing before switching on the unit.
Do not overfill the bowl (6) for mixing with
products.
Before blending peel the fruits, remove in-
edible parts, such as pips, and cut fruits
into 2,5cm cubes.
• Use the speed control (1) to set the de-
sired operating speed.
• To switch on the blender press and hold
the (2) button.
• After you finish using of the unit, unplug
the unit and remove the attachment (4),
by turning it anti clockwise.
• Do not remove the attachment (4) while
the unit is operating.
• In order not to damage the blades, do not
process very hard products, such as ice,
frozen products, cereals, rice, season-
ings and coffee.
• When mixing of products in a metal bowl,
put on a plastic attachment (7) on the
lower part of the attachment (4), this will
protect your cookware from scratching.
USING OF THE WHISK
Use the whisk attachment only to make
1461.indd 4 1461.indd 4
cream, cook of sponge dough or mixing
ready desserts.
WARNING: before assembling make sure
that the unit is not plugged in.
• Insert the attachment (12) into the motor
unit (3), and turn it clockwise until bump-
ing.
• Inset the whisk (13) into the gear (12).
• Insert the plug into the socket.
• Immerse the whisk (13) into the bowl with
the products, use the speed control (1) to
set the required speed and press the (2)
button to switch on the unit.
Attention!
Do not use the whisk (13) to make stiff
dough.
Products should be put into the bowl before
switching on the unit. Do not overload the
bowl for mixing.
USING OF THE MINI-SHOPPER
Mini-chopper is used to chop meat, cheese,
onion, herbs, garlic, carrots, walnuts, al-
monds, fruits.
Attention!
Do not chop very hard products, such as
nutmegs, coffee beans and cereals.
Before starting to chop:
• Cut meat, cheese, onion, garlic, carrots
into (equal) slices.
• Remove stems from herbs, peel the
nuts.
• Remove bones, tendons and cartilage
from meat.
Chopping
WARNING: Do not overfill the chopper
bowl.
Warning: the blade very sharp! Always hold
the knife with the plastic end upwards.
1. Put the blade (10) on the chopper axis
(9). Always use the chopper bowl with
the anti clipping mat (11), which can be
used as a bowl (9) lid.
2. Put the products into the chopper bowl
(9).
4 4
27.01.2010 11:23:41 27.01.2010 11:23:41