Herunterladen Inhalt Inhalt Diese Seite drucken

Vitek VT-1461 Betriebsanweisung Seite 5

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
3. Put the gear lid (14) on the bowl (9) and
turn clockwise till the clamp.
4. Insert the motor unit (3) into the gear-lid
(14) and turn anti-clockwise until bump-
ing.
5. Use the speed control (1) to set the re-
quired speed. To switch on the unit press
the button (2). During operation hold the
motor unit (3) with one hand, and the
chopper bowl (9) – with the other.
6. After usage disconnect the motor unit
firstly (3), by turning it clockwise, and
then remove the gear (14) by turning it
clockwise.
7. Be careful while removing the blade
(10).
8. Take the chopped products from the
chopper bowl (9).
Note: You can keep the blender set on the
(8), and the support itself (8) can be fas-
tened on the wall.
CLEANING
ATTENTION! The blades are very sharp
and dangerous. Handle them carefully!
• Unplug the unit before cleaning.
• Remove the attachments
• Use only a damp cloth to clean the motor
unit (3).
• You can rinse the gears (14, 12) under
tapping warm water, but never immerse
them into water.
• After processing of salty and sour prod-
ucts it is better to rinse the blade (10) im-
mediately.
• While possessing products with strong
dyeing properties (for instance carrot
or beet-root) the attachments can get
colored, wipe the attachments using a
cloth, dampened in plant oil.
• Wash the attachments and the bowl in
warm soapy water, rinse and dry thor-
oughly.
• Do not wash the attachments if they are
on the motor unit (3), always remove the
attachments and then wash.
1461.indd 5
1461.indd 5
DO NOT IMMERSE THE MOTOR UNIT
AND THE GEARS INTO ANY LIQUIDS, DO
NOT WASH THEM WITH WATER OR IN A
DISH WASH MACHINE.
NEVER WASH THE ATTACHMENTS IN A
DISH WASH MACHINE.
Delivery set:
1 – Motor unit
2 – Removable blender attachment
3 – Bowl lid
4 – Bowl
5 – Attachment, protecting from scratches
6 – Support
7 – Chopper bowl
8 – Chopping knife
9 – Anti-slip mat
10 – Whisk gear
11 - Whisk
12 – Gear lid
13 – Instruction manual – 1 pc.
Specifications
Power supply: 220-240 V ~ 50 Hz
Power consumption: 300 W
Specifications subject to change without
prior notice.
Service life of appliance - 3 years
GUARANTEE
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the
EMC-Requirements as laid down
by the Council Directive 89/336/
EEC and to the Law Voltage
Regulation (73/23 EEC)
5
ENGLISH
27.01.2010 11:23:41
27.01.2010 11:23:41

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis