Intended Use; Function Description; Overview - FLORABEST FGS 10 A1 Originalbetriebsanleitung

GB

Intended use

The unit is to be used for cutting and trim-
ming twigs on hedges, bushes and shrubs
and for trimming grass at the edges and
on smaller surfaces in domestic applica-
tion only.
The unit is only to be used by adults.
People under 16 should only use this unit
under adult supervision.
Any other use not specifically mentioned
in this manual can lead to damage to the
unit and may present a serious hazard to
the user.
The operator or user is responsible for
accidents or damage to other persons or
their property.
The manufacturer will not be held respon-
sible for damage or injuries caused by use
outside that stipulated by the manual or
by improper handling.

Function description

The battery-powered grass and bush trim-
mer is a combination unit with two inter-
changeable cutting devices. These are
coated with plastic to prevent rust. For
use as a shrub trimmer, a double-sided
blade block is used as the cutting head.
When cutting, the blades oscillate linearly
against an unsharpened cutting plate. The
catching blades are round off at the side
to prevent accidents, and positioned in an
offset arrangement to reduce the risk of
injury. A cutting head with several blades is
provided for use as a grass trimmer. This
also oscillates on a bladed plate, producing
the same movement as a pair of scissors.
The unit is equipped with a telescopic shaft
and rollers for increased working speed
and comfort. Please read the following
descriptions for the function of the various
controlling parts of the unit.
10

Overview

The major functional parts
are shown on the foldout
page.
1 Unit handle
2 On/off switch, unit
3 Off-lock switch, unit
4 Charge display (LED)
5 Wheels on a shaft, clip faste-
ning
6 Safety release knob for swivel-
ling shear blade
7 Battery
8 Recharging socket
9 Opening for telescopic shaft
10 Blade guard for grass-trimming
blades
11 Grass-trimming blades
12 Shrub-trimming blades
13 Blade guard for shrub-trimming
blades
14 Additional handle
15 Off-lock switch, telescopic shaft
16 On/off switch, telescopic shaft
17 Handle
18 Height adjustment screw
19 Safety switch
20 Telescopic shaft (Two sections)
21 Recharger
22 Recharger cable plug