Cleaning Without The Insert - Silvercrest SUR 46 A1 Bedienungs- Und Sicherheitshinweise

If not all of the parts are present or your new device is damaged,
please contact the service hotline (see guarantee notice).
Place the ultrasonic cleaning device in such a way on a firm, flat
surface that it cannot tip over. This surface should be easy to clean,
brightly lit and readily accessible. Do not place the device on
surfaces that may become hot, e.g. on hotplates or next to a gas
cooker.
Insert the mains plug
(180 seconds) appears in the display
Important! Ensure that the mains voltage is 220–240 V! (See
the type plate on the underside of the device). The device might
otherwise be damaged.
Operation
Important! Fittings, stickers and decorations that are loosely attached
to objects, as well as other loose parts, e.g. screws on / in spectacles,
may become detached during the cleaning process.
You should therefore clean such items not more than once a month.
Note: The On-switch "ON"
control the time interval of the timer or the cleaning process. The actual
switching on and off of the device is controlled by the mains plug

Cleaning without the Insert

Ensure that the device is disconnected from the mains supply.
Open the lid
Place the object to be cleaned into the stainless steel tank
Before Initial Use / Operation
into a power socket. The number
12
and the Off-switch "OFF"
1
manually.
5
as standard.
2
3
GB/MT
simply
.
12
.
7
79