Cleaning The Waste Water Tank - Silvercrest SHBR 560 B1 Bedienungsanleitung

NOTE
► After every use, carry out a self-cleaning of the appliance (see section
Self-cleaning function).
Clean the appliance with a moist cloth or rag. For stubborn soiling use a mild
detergent on the cloth.

Cleaning the waste water tank

NOTE
► Empty the waste water tank
water has reached the MAX marking.
► When emptying the waste water tank
wash basin) is not blocked by hair or coarse dirt.
► Once the waste water tank
to switch off automatically.
Proceed as follows to empty the waste water tank
1. Press the knob at the top of the waste water tank
Hold the handle of the waste water tank
wards.
2. Pull the waste water tank
Pull the lid of the waste water tank
(see fig. 21).
Fig. 20
Tip out the dirty water and dirt (see fig. 22).
Rinse the waste water tank
SHBR 560 B1
2
after every use and as soon as the dirty
2
make sure that the drain (e.g. the
2
is full, the float
2
while pressing the knob down-
2
forwards out of the appliance (see fig. 20).
9
upwards out of the waste water tank
Fig. 21
2
in hot running water (see fig. 23).
8
causes the suction motor
2
:
2
downwards (see fig. 20).
GB │ IE │
2
15 ■