Assembly Iris Led 10 F; Assembly Luminaire Head; Operation; Iris Led 10 (All Models) - Derungs D med IRIS LED 10 Montage- Und Gebrauchsanweisung


Push cover and end ring over the wall bracket
and tighten them (0.5Nm)

Continue with luminaire head assembly, see
Chapter 7
6

ASSEMBLY IRIS LED 10 F

Place support tube 1 on caster 2

Put supporting disc 3 in place, screw in and

screws M8 4 and M5 5 (both with
tighten
toothed washer) (20Nm and 5Nm)
Insert arm 6 into support tube 1

Mount cable holder 7 with screw M4 (4Nm)

(also serves as pull-out safety device)

Continue with luminaire head assembly, see
Chapter 7
7 ASSEMBLY
LUMINAIRE HEAD
WARNING
Danger from falling luminaire head

Ensure that the luminaire head has been
correctly secured.

An incorrectly mounted luminaire head can
cause damage to property.

Plug cables together
Push luminaire head 1 (with catches 2 aligned

upward) and arm 3 together
Secure luminaire head 1 using 2x countersunk

screws M4 4 (both with toothed washer)
(1.5Nm)
Remove the white cap 1 and screw in the

handle 2 by hand until it reaches the stop 3.
8

OPERATION

8.1

IRIS LED 10 (all models)


Switching the luminaire on and off

Luminaire has two-stage switching (60%/ 100%)
ENG
33