Adjusting The Product; Adjusting The Height; Adjusting The Angle; Adjusting Oscillation - Silvercrest VE-6035SCR Montage-, Bedienungs- Und Sicherheitshinweise

Adjusting the product

Adjusting the height

Loosen the height adjustment ring
it anticlockwise.
Move the internal pole
adjust the desired height.
Once you have achieved the desired height,
secure the height adjustment ring
clockwise to do so.

Adjusting the angle

Gently tilt the motor
9
to achieve the desired angle.
Note: The tilt angle is 25 °.

Adjusting oscillation

Push the oscillation switch
the motor turn.
9
Note: The motor oscillates independently
9
in a range of 85 °.
Push the oscillation switch
motor from rotating.
9

Operation

Operation via control panel

Press the ON / SPEED button
the product.
With the product switched on, repeatedly press
the ON/ SPEED button
the speed settings LOW (low), MID (medium)
und HIGH (fast).
Note: An illuminated LED on the operating
panel indicates the selected speed.
17
Push the OFF button
20
off.
by turning
12
up or down and
11
. Turn it
12
forward or backward
down to make
8
up to stop the
8
, to switch on
19
, to choose between
19
to switch the product

Operation via remote control

Push the ON- / SPEED button
product on.
With the product switched on, repeatedly press
the ON / SPEED button
speed levels.
When the product is switched on, repeatedly
press the MODE button
tween three fan modes (automatic, natural,
sleep). An LED in the control panel indicates
the selected mode.
Red = Automatic (continuous operation at the
selected speed level)
Green = Natural (continuous operation with
changing speed levels)
Off = Sleep (continuous operation with
decreasing speed level)
With the product switched on, push the TIMER
button to set a time after which the product
24
shuts off on its own. The selected time can be
increased by pushing the TIMER button
repeatedly. The set time is indicated by the
illuminated LEDs on the control panel
shortest Timer is 0.5 hours, the longest 7.5 hours.
Note: The timer can be exclusively adjusted
via the remote control.

Cleaning and care

Clean the product with a damp cloth.
Never use strong or abrasive cleaning agents,
scourers or steel wool. This would damage the
product.
Never immerse the product in water or other
liquids.

Disposal

The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
to switch the
23
to switch between
23
, to choose be-
25
24
. The
17
GB/IE/NI 11