Airflow Modes; Timer (Automatic Switch Off Time); Cleaning And Care; Cleaning The Blade And The Safety Guard - Silvercrest SV 60 A2 Montage-, Bedienungs- Und Sicherheitshinweise

˜ Airflow modes
Press 22 repeatedly to select the desired
airflow mode:
Press Mode description
Natural
1x
through different airflow speeds .
Amending airflow speed: In natural
mode, press
1x Mainly low speed
2x Half low half high speed
3x Mainly high speed
Sleep
2x
3 different speed modes (if started from
speed mode 3) . The product decreases
the speed mode every 15 minutes and
then stays at the lowest speed mode .
Soft
3x
Normal – constant airflow at the
4x
currently selected airflow speed
(from 1 to 6) .
NOTE: The normal mode is the
default mode once power is on .
˜ Timer (automatic switch off time)
When the product is on, press
to set the automatic turn off time . You can choose
from 1 to 8 hours .
14 GB
– constant cycling
21 repeatedly:
– constant cycling through
– constant soft airflow .
24 repeatedly
˜ Cleaning and care
Before cleaning, press
product from the power supply to completely
switch off the product . Remove the battery from
the remote control 31 before cleaning . Use a
dry lint-free cloth to clean the contacts on the
battery / rechargeable battery before inserting!
m WARNING! Do not immerse the electrical parts
of the product in water or other liquids . Never
hold the product under running water .
Clean the product with a slightly moistened cloth .
Do not allow any water or other liquids enter the
product's interior .
Do not use abrasives, harsh cleaning solutions or
hard brushes for cleaning .
Let all parts dry afterwards .
˜ Cleaning the blade and the
safety guard
Dust collections on blade 4 and on the
grilles 2 / 6 can be removed with a brush
(not supplied) . In case of serious soiling, the front
grille 6 can be removed for thorough cleaning .
To do so, reverse the steps of the "Assembly"
chapter .
Wipe the grilles 2 / 6 and blade 4 with
a damp cloth . For stubborn soiling use a mild
detergent on the cloth . Dry completely before
re-assembling them .
NOTE: The grilles 2 / 6 act as safety guards
to protect the user from touching the blade 4 .
m DANGER! Ensure that the product is switched
off from the supply mains before removing the
guard .
Mount the front grille 6 back onto the product
when cleaning is complete .
23 and unplug the