Adjusting The Fan Speed; Setting The Timer; Oscillation - Silvercrest STV 50 F1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest STV 50 F1
•
Operate the fan on a flat, stable surface.
•
Insert the mains plug into a properly installed mains socket.
•
To switch the device on, turn the rotary
switch (2) to ON.
•
To switch the device off, turn the rotary
switch (2) to OFF.

8.2 Adjusting the fan speed

•
Low fan speed: Press button 1 (6) until it locks.
•
Medium fan speed: Press button 2 (4) until it locks.
•
High fan speed: Press button 3 (3) until it locks.
•
To stop the air circulation, press the OFF button (7).

8.3 Setting the TIMER

You can use the TIMER to program a runtime between 0 and 120 minutes.
•
To switch the TIMER on, turn the rotary
switch (2) to a position between 0 and
120 minutes. The device switches on.
•
Please note that an exact setting to the
minutes it is not possible.
•
To switch the TIMER off, turn the rotary
switch (2) to OFF.

8.4 Oscillation

You can have the fan make horizontal movements (oscillations):
•
Press the OSC button (5) to the lower position MOVE to switch oscillation on.
•
Press the OSC button (5) again to switch oscillation off. The OSC button (5) toggles back to
the upper position STOP.
22 - English