Adjusting The Product; Adjusting The Height; Adjusting The Angle; Adjusting Oscillation - Silvercrest IAN 331472_1907 Montage-, Bedienungs- Und Sicherheitshinweise

Adjusting the product

Adjusting the height

Loosen the height adjustment ring
it anticlockwise.
Move the internal pole
the desired height.
Once you have set the desired height, secure
the height adjustment ring
by hand to do so.

Adjusting the angle

Gently tilt the motor
9
to achieve the desired angle.
Note: The tilt angle is 25 °.

Adjusting oscillation

Push the oscillation switch
the motor turn left and right.
9
Note: The motor
oscillates independently
9
in a range of 85°.
Push the oscillation switch
the motor from turning left and right.
9

Operation

Operation via control panel

Press the ON / SPEED button
the product.
With the product switched on, repeatedly press
the ON/ SPEED button
the speed settings LOW (low), MID (medium)
und HIGH (fast).
Note: An illuminated LED on the operating
panel indicates the selected speed.
18
Push the OFF button
21
by turning
12
up or down and set
11
. Turn it clockwise
12
forward or backward
down to make
8
upwards to stop
8
, to switch on
20
, to choose between
20
to switch the product off.

Operation via remote control

Push the ON- / SPEED button
product on.
With the product switched on, repeatedly press
the ON / SPEED button
speed levels.
When the product is switched on, repeatedly
press the MODE button
three fan modes (automatic, natural, sleep).
An LED in the control panel
selected mode.
Red= Automatic (continuous operation at the
selected speed level)
Green = Natural (continuous operation with
regularly changing speed levels)
Off = Sleep (continuous operation with decreasing
speed level)
With the product switched on, push the TIMER
button to set a time after which the product
25
shuts off on its own. The selected time can be
increased by pushing the TIMER button
peatedly. The set time is indicated by the illumi-
nated LEDs on the control panel
shortest timer is 0.5 hours, the longest 7.5 hours.
Note: The timer can be exclusively adjusted
via the remote control.
Note: You can add times by pressing the
TIMER button multiple times.
25

Programme

There are multiple programmes available which en-
able you to choose custom settings for the product:
1) Simple sleep mode
Set the strength at which you would like the product
to start (HIGH (fast) / MID (medium) / LOW (slow)).
The NATURAL function will be used in this instance.
After each 30 minute interval, the speed reduces to
the next slowest level, until the product continues to
run at „LOW" strength.
to switch the
24
to switch between
24
, to choose between
26
indicates the
18
re-
25
. The
18
GB/IE 21