Initial Use; Switching The Fan On And Off; Configuring The Fan Speed; Configuring The Timer - Silvercrest STV 45 E1 Bedienungsanleitung Und Sicherheitshinweise

8. Initial use

8.1 Switching the fan on and off

Proceed as follows to put the fan into operation:
•
Select a location that meets the safety instructions in Section 5.
•
Operate the fan on a flat, stable surface.
•
Insert the plug into a properly installed socket.
•
Turn the power supply on by setting the
rotary switch (2) to the ON position.
•
Turn the power supply off by setting the
rotary switch (2) to the OFF position.

8.2 Configuring the fan speed

•
Fan speed low: Press button 1 (6) until it locks in place.
•
Fan speed medium: Press button 2 (4) until it locks in place.
•
Fan speed high: Press button 3 (3) until it locks in place.
•
Stop the ventilation by pressing the OFF button (7).

8.3 Configuring the TIMER

The TIMER enables you to set a running time between 0 and 120 minutes.
•
Turn the TIMER on by setting the rotary
switch (2) to any position between 0 and
120 minutes. This will also turn the
power supply on.
•
Please note that the TIMER cannot be set
to a precise minute.
•
Turn the TIMER off by turning the rotary
switch (2) to the OFF position.
SilverCrest STV 45 E1
English - 9