TESA INOTEST Gebrauchsanleitung Seite 21

INOTEST
4
A wide variety of measuring anvils (Fig. 2) is avai-
lable, enabling the instrument to be adapted very
quickly to any large-dimension quality control
problem: inside measuring of bores or distances,
outside measuring of diameters or lengths, centre
distances, distances between faces etc.
The measuring anvils are interchangeable and ad-
justable, so the INOTEST can be applied at the most
favourable point on the workpiece at the depth
required, whether in a groove, at the bottom of an
undercut, or in a blind bore. (Fig. 3)
Fig. 3.