EdilKamin MAXIMA series Installations-, Betriebs- Und Wartungsanleitung Seite 93

• Check the small pressure-switch pipe, and replace when
necessary (c - fi g. 9).
MANUAL CLEANING WITH CLEANING
BRUSHES
(by the TAC - authorised Edilkamin Technical Assistance
Centre)
If the gear motor that drives the cleaning brushes breaks, you
can clean manually. On the left side of the panel there is an
opening for inserting the hexagonal wrench provided (d - Fig.
10).
Once the hexagonal wrench is inserted in its seat, turn back
and forth (e - Fig. 11) to operate the cleaning brushes.
AND, IN ADDITION:
• Clean the boiler internally and externally
• Clean fans, verify mechanical and clamp loosening
• Check the expansion tank
• Check and clean the circulator ( g. 5 a pag. 92)
• Check the probes
• Clean/check the Synoptic Panel
• Visually inspect the electrical wires, connections and
power cable
• Functionality test: load the feed screw, ignite, let it run
for 10 minutes and shutdown
MAINTENANCE
fi g. 9
fi g. 10
fi g. 11
If maintenance if not implemented, the warranty will be
rendered null and void. If the boiler is used very frequen-
tly, it is advisable to clean the smoke channel and the
fume duct every 3 months. When maintenance is imple-
mented in the smoke channel, consider UNI 10847/2000
Individual chimney installations for generators running
on liquid and solid fuel. Maintenance and control. The
chimney stacks and smoke ducts to which solid fuel
appliances are connected should be cleaned once a year
(verify whether in there are regulations in force in your
country regarding this). In the even that regular checks
and cleaning are not performed the probability of a chim-
ney fi re increases. N.B.
- Any unauthorised modifi cation is forbidden
- Use spare parts recommended by the manufacturer
- The use of counterfeit parts results in the guarantee
becoming null and void
- 93
-
c
d
e