EdilKamin MAXIMA series Installations-, Betriebs- Und Wartungsanleitung Seite 83

SETS THE DATE/TIME
On this screen, you can set the date/time.
To edit a fi eld, you must fi rst select it by touching the value you want to change and then using the plus/minus buttons.
Press the Save button to confi rm the new settings.
Select to set the
date
Select to set the
time
Select to set the
24-hour clock
display format
TIME PROGRAM
In this screen, you can set the weekly program of the boiler.
For each day of the week, you can set up to 6 time slots and, in each, the target output temperature for the boiler.
To set a time slot, select the tab for the day to confi gure, then the set fi eld of the desired time slot (the fi eld will be high-
lighted), adjust the time by touching the plus/minus buttons. Do the same with the temperature fi eld.
To turn off the boiler, set the temperature box to "OFF". Press the "-" to lower the temperature setting to the minimum,
and at the end of the range you will fi nd the OFF option.
To apply the time slot, you must enable it.
For the changes to take effect, press the Save button.
You can copy the entire schedule of one day of the week to one or more tabs of the other days with this procedure:
1. Select the tab of the day you want to copy
2. Set the time slots
3. Press the Copy button (the button will change to End Copy)
4. Select the tab of the day you want to copy to
5. Press the Paste key
6. Repeat from step 4 for each tab to be copied
7. Select the tab from which the settings were copied
8. Press the End Copy button to end the operation
INSTRUCTIONS FOR USE
- 83
-
Plus/minus but-
tons
Saves the new
settings
Exits the page