EdilKamin MAXIMA series Installations-, Betriebs- Und Wartungsanleitung Seite 78

COMFORT CLIMA TAB
This tab displays the status of the Comfort Clima function. The function is activated or deactivated by pressing the icon.
With the Comfort Clima function, when the boiler is on it will automatically go to minimum power as soon as the room
temperature reaches the set temperature. In this way the room will be maintained at the desired comfort setting. Using
the plus/minus buttons, you can change the target room temperature.
The temperature sensor is mounted on the console.
Comfort Clima
on/off icon
Room temper-
ature setting
NOTE: To use this feature, you must install a second boiler touch console (optional) or a Domoklima graphic console
(optional) in the room where you want to control the temperature. You can also use a remote control (optional) that al-
lows you to transmit the temperature to the boiler over a wireless connection.
PELLET RESERVE TAB
On this tab, you can view and manage the nominal autonomy status of the boiler. To properly use this feature, once
you've added pellets to the hopper, set their quantity in the Set Load fi eld and then press the Load kg button. When the
button is pressed, the Set Load value will be added to the Hopper Load. You can change the Set Load value by pressing
the plus/minus buttons. The nominal pellet quantity determines the Reserve Time automatically calculated by the boiler
based on consumption at current operating power. The Reserve Time indicates the boiler's hours of autonomous opera-
tion before the pellets in the hopper are totally consumed. The counter values displayed on this page are only indicative.
When the boiler is using the reserve, in addition to an indication on the status bar, the icon in this tab will
change status .
Buttons for
increasing/
decreasing Set
Load
Nominal quan-
tity of pellets
added to the
pressure of
Load kg
INSTRUCTIONS FOR USE
- 78
-
Toggles the dis-
play of: room-
temperature
and date/time
Temperature
plus/minus but-
tons
Nominal quan-
tity of pellets in
the hopper
Residual au-
tonomy
Increases the
Hopper Load
counter by the
quantity in Set
Load