Reviewing Test Results - Fora 6 Connect Bedienungsanleitung

Disposing Used Test Strip and Lancet
To remove the used test strip, simply push the Test Strip
Ejector button upward to eject the used test strip. The device
will automatically turn off after the test strip is removed.
To remove the used lancet, remove the lancet from the
lancing device after you have finished testing. Discard
your used strip and lancet properly in a puncture-resistant
container.
Important!
The used lancet and test strip may be biohazards. Please
consult your health-care provider for proper disposal which
complies with your local regulations.

Reviewing Test Results

Your device stores the 1000 most recent test results along
with respective dates and times in its memory. To enter the
device memory, start with the device switched off.
To review all test results, do the following:
1. Press and release MAIN button or
on the screen.
2. Press MAIN to review the test results stored in the device.
Press or repeatedly to review other test results stored
in the device. After the last test result, press MAIN again and
the device will be turned off.
. The " " icon appears
EN-13
(100 mg/dL = 5.5 mmol/L; 200 mg/dL = 11.1 mmol/L)
To review the day-average test results, do the following:
1. Press and release to enter memory mode for average
results with " " and
Release MAIN and then your 7-day average result measured
in general mode will appear on the display.
2. Press or to review 14, 21, 28, 60 and 90-day average
results stored in each measuring mode in the order of Gen,
AC, then PC.
displayed on the screen.