Markings For Cutting Line; Connecting The Sawdust Extractor; Changing The Saw Blade; Switching The Laser On And Off - Parkside PTS 710 A1 Originalbetriebsanleitung

Types of saw blades:
The types of saw blades supplied cover the most
common fields of application.
HSS circular saw blade
Description: ø 85 mm, 60 teeth
Suitable for: Softwood and soft metals
HSS circular saw blade
Description: ø 85 mm, 80 teeth
Suitable for: Softwood and soft metals
Diamond-coated cutting saw blade
Description: ø 85 mm
Suitable for: Ceramics and stone
TCT saw blade Z85/30:
Description: ø 85 mm, 30 teeth suitability:
Wood and plastic

Markings for cutting line

The viewing window for the cutting line helps you
accurately guide machine along the cutting line on
the workpiece.
♦ For a true-to-size cut, place the machine onto
the workpiece so that the cut marking appears
in the viewing window for the cutting line

Connecting the sawdust extractor

♦ Push the suction hose
connection and lock it in place.
♦ Attach an approved dust and sawdust extractor
to the suction hose

Changing the saw blade

WARNING! RISK OF INJURY! Always
remove the plug from the mains
power socket before carrying out
any work on the appliance.
1. Actuate the spindle lock
key to loosen the tensioning screw
clockwise to open). Now remove the tensioning
screw and the clamping flange
Fig. B).
PTS 710 A1
Z85/60:
Z85/80:
Z85:
.
onto the dust extractor
.
and use the hex
(turn
(see also
2. Set the cutting depth to the maximum position.
3. Activate the safety lock-out
that position. Swivel the base plate
4. Remove the saw blade
5. Fit the saw blade in the reverse order as de-
scribed.
6. Press the spindle lock button
es) and use the hex key
sioning screw .
■ The arrow on the saw blade must correspond to
the arrow showing the direction of rotation
(running direction shown on the appliance).
Switching the laser on and off
Switching on:
♦ Press the Laser ON/OFF switch
Switching off:
♦ Press the Laser ON/OFF switch
NOTE
► If the battery is depleted, replace it with a
new 3 V button cell (type CR 2023).

Cleaning and maintenance

WARNING! RISK OF INJURY!
Always remove the plug from the
mains power socket before carrying
out any work on the appliance.
NOTE
► Have the carbon brushes replaced by the
manufacturer, its customer service or a similarly
qualified person.
■ Always clean the appliance after completion
of work.
■ Use a cloth to clean the housing; do not use
petrol, solvents or cleaners.
and keep it in
upwards.
.
(until it engag-
to tighten the ten-
.
again.
GB │ IE │
29 ■