Worx PROFESSIONAL WU530 Übersetzung Der Originalanleitung Seite 6

Warning: The vibration emission value during actual use of the
power tool can differ from the declared value depending on the ways
in which the tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and
in good condition.
The tightness of the grip on the handles and if any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
This tool may cause hand-arm vibration syndrome if its use is not
adequately managed.
Warning: To be accurate, an estimation of exposure level in the
actual conditions of use should also take account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well
lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration
accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across
a number of days.
C or less.
o
Accessories
45min charger (WA3836)
•
Battery pack (WA3522)
•
•
Hex key
•
Parallel guide
•
Saw blade 165mm 24T
We recommend that you purchase your accessories from the same
store that sold you the tool. Use good quality accessories marked with
a well-known brand name. Choose the type according to the work
you intend to undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
6
WU530 WU530.9
1 --
2 --
1 1
1 1
1 1