CEMO Easy 460l Bedienungsanleitung Seite 14

GB
Contents
1. General
2. Technical data
3. Initial setup
4. Filling the container
5. Operation
5.1 Transport
5.2 Crane operation
5.3 Filling
5.4 Filling (completing)
5.5 Environmental factors
6. Accessories
7. Maintenance
8. Inspections/Use
9. Warranty
10. Declaration of compliance
11. Permit
12. Inspection protocol
14
1. General
The mobile diesel filling station DT-Mobil Easy
460 l / 600 l is a tested and approved IBC in
accordance with ADR for hazardous goods
in packaging group III (low-hazard liquid sub-
stances).
The filling station is tested for function and leaks
before dispatch.
The preferred intended use of the DT-Mobile Easy
460 l / 600 l is for the filling of vehicles with diesel
fuel.
Other applications are not permitted, or require
the permission of the manufacturer CEMO GmbH.
Misuse poses dangers to the life and limb of the
operator, the function of the filling station, the
assets of the operator and the environment.
All persons entrusted with the operation and
maintenance of the filling station must observe
the applicable regulations regarding occupational
safety.
2. Technical data
Nominal volume [l]
Dimensions [cm]:
- Length
- Width
- Height:
without flap lid
with flap lid (closed)
with flap lid (open)
Weight when empty [kg]:
- without flap lid
- with flap lid
Total weight [kg]:
- without flap lid
- with flap lid
460 600
116 116
80 80
81 102
86 107
149 170
42 48
55 61
438 565
451 578