Wilo -CronoLine IL 250 series Einbau- Und Betriebsanleitung Seite 31

2.3 Dangers from non-observance of safety rules
Non-observance of safety reference may cause harm to persons and pump or
installation. Failure
warrantly/damage claims.
In detail, non-compliance may e.g. cause the following danger situations:
- Failure of important pump or machinery functions
- Injury resulting from electrical or mechanical factors
2.4 Safety reference for the operator
Ruling local regulations on the prevention of accidents must be observed.
Danger from electrical energy must be excluded (conforming to local and general
regulations).
2.5 Safety reference for inspections and installation
It is the operators responsibility to ensure that all inspection and installation work is
carried out by authorized and qualified personnel only, after having made them-selves
fully conversant with these instructions.
On principle, work must be carried out only with the pump/plant switched off and at
complete standstill.
2.6 Unauthorized modification and manufacture of spare parts
Any alterations to the pump/plant are only permitted if authorized by the manufacturers.
Original spare parts ensure safety and reliability. The use of unauthorized parts could
invalidate any claims for consequential damages.
2.7 Inadmissible operating conditions
Operational safety of the plant is only ensured if used in strict accordance with chapter 1
of these instructions. Limits stated in catalogue/data sheet must not be exceeded under
any circumstances.
Installation and operating instructions
Wilo-CronoLine IL 250...
to comply with
24
safety reference
English
could invalidate
WILO AG 08/2006
all