Troubleshooting - Klarstein 10032283 Handbuch

EN
36

TROUBLESHOOTING

What? How?
Everyday 1. Switch the power to the
soiling on glass cooktop off.
(fingerprints, 2. Apply a cooktop cleaner
marks, stains while the glass is still warm
left by food (but not hot!)
or non-sugary 3. Rinse and wipe dry with a
spillovers on the clean cloth or paper towel.
glass) 4. Switch the power to the
cooktop back on.
Boilovers, melts, Remove these immediately with
and hot sugary a fish slice, palette knife or
spills on the razor blade scraper suitable for
glass ceramic glass cooktops, but
beware of hot cooking zone
surfaces:
1. Switch the power to the
cooktop off at the wall.
2. Hold the blade or utensil at
a 30° angle and scrape the
soiling or spill to a cool area
of the cooktop.
3. Clean the soiling or spill up
with a dish cloth or paper
towel.
4. Follow steps 2 to 4 for
'Everyday soiling on glass'
above.
Important!
• When the power to the
cooktop is switched off,
there will be no 'hot
surface' indication but the
cooking zone may still be
hot! Take extreme care.
• Heavy-duty scourers,
some nylon scourers and
harsh/abrasive cleaning
agents may scratch the
glass. Always read the
label to check if your
cleaner or scourer is
suitable.
• Never leave cleaning
residue on the cooktop: the
glass may become stained.
• Remove stains left by
melts and sugary food
or spillovers as soon as
possible. If left to cool on
the glass, they may be
difficult to remove or even
permanently damage the
glass surface.
• Cut hazard: when the
safety cover is retracted,
the blade in a scraper
is razor-sharp. Use with
extreme care and always
store safely and out of
reach of children.