Using The Timer - Klarstein 10032283 Handbuch

EN
32

USING THE TIMER

You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
• You can set it to turn one cooking zone off or more than one after the set time is up.
• You can set the timer for up to 99 minutes.
Using the Timer as a Minute Minder without selecting any cooking zone
1 Make sure the cooktop is turned on. Note: you can use the minute minder even if
you're not selecting any cooking zones.
2 Touch timer control , The minder indicator will start flashing and [30] will show in
the timer display.
3 Set the time by touching the [-] or [+] control, the minute minder indicator will
start flashing and will show in the timer display. Touch the [-] or [+]control once
to decrease or increase by 1 minute. Hold the [-] or [+] control of the timer to
decrease or increase by 10 minutes. If the setting time exceeds 99 minutes, the
timer will automatically return to 0 minute.
4 Touch the 'Timer' , the timer is cancelled,
and the [--] will show in the minute
display.
5 When the time is set, it will begin to count down
immediately. The display will show the remaining time and
the timer indicator will flash for 5 seconds.
6 Buzzer will beep for 30 seconds and the timer indicator
shows [- -] when the set time finished.