Intended Use; Safety; Basic Safety Instructions - Silvercrest SLB 1.2 E3 Bedienungsanleitung Und Sicherheitshinweise

CAUTION
A warning of this risk level indicates potential
damage to property.
Failure to avoid this situation could result in damage to property.
► Follow the instructions in this warning to prevent damage to
property.
NOTE
► A note indicates additional information that will assist you in
handling the device.

Intended use

The speakers are information technology devices. They are designed
exclusively for connection to a PC, a notebook, or an audio device*
(e.g. MP3 player) using a 3.5 mm jack plug and are intended for play-
ing back audio signals. This device is exclusively for private use, and is
not intended for industrial or commercial purposes. The device is not
intended for any other use or for uses extending beyond those stated.
Claims of any kind for damage arising as a result of non-intended use
will not be accepted. The user is the sole bearer of the risk.
* If the loudspeaker is to be connected to a device without a USB
connection, an external power supply with USB output is required
(not included in delivery). The mains adapter should have the fol-
lowing specifications: 5 V

Safety

This section provides you with important safety information regarding
the handling of the device. The device complies with the statutory
safety regulations. Incorrect usage can lead to personal injury and
property damage.

Basic safety instructions

For safe handling of the device, follow the safety information below:
■ Check device for visible external damage before use. Do not use
devices that have been damaged or dropped.
■ Damaged cables or connections should be replaced by the
Customer Service department.
■ Always grasp the connection cable by the plug. Do not pull on
the power cable itself!
■ Do not place any objects, furniture or similar on the connection
cable and make sure that the cable is not trapped.
■ Never make a knot in the connection cable and do not bind it
together with other cables. The power cable should be routed
so that it cannot be stepped on or tripped over.
SLB 1.2 E3
(direct current), min. 500 mA.
GB │ IE │
17 ■