Switching The Light On And Off; Switching Bass And Treble Boost On/Off; Connecting Headphones - Silvercrest SLB 1.2 E3 Bedienungsanleitung Und Sicherheitshinweise

Switching the light on and off
♦ Turn the LIGHT switch
switch the loudspeaker
♦ Turn the LIGHT switch
switch the loudspeaker
Switching bass and treble boost on/off
♦ Turn the BASS control
♦ Turn the BASS control
♦ Turn the TREBLE control
♦ Turn the TREBLE control

Connecting headphones

DANGER
►
Ensure that the ON / OFF | VOL control
♦
position.
♦ Insert the 3.5 mm jack plug of the headphones into the head-
phone socket
♦ Before placing the headphones on your head, switch the loud-
speaker
NOTE
► As soon as you connect the headphones, the loudspeakers
will be muted.
► The headphone output is passive, which means that the volume
can be controlled using the ON / OFF | VOL control
maximum volume, however, is specified by the computer or
audio device. Please note that headphones may only be con-
nected if the audio device has the necessary standard volume
limitation applied to its output. Please refer to your audio
device instruction manual for more information.
│ GB │ IE
■ 22
Loud music can lead to hearing damage.
Avoid extremely loud sound levels, especially over
long periods of time, when you are using head-
phones.
.
on again and carefully increase the volume.
to the "ON" position in order to
light on.
to the "OFF" position in order to
light off.
clockwise to increase the bass.
anticlockwise to reduce the bass.
clockwise to increase the treble.
anticlockwise to reduce the treble.
is in the "OFF"
. The
SLB 1.2 E3