Fitting The Support Feet; Installation Site Requirements; Controls - Silvercrest SLB 1.2 E3 Bedienungsanleitung Und Sicherheitshinweise

Fitting the support feet

♦ Slide the support feet
behind
Fig. 1

Installation site requirements

For safe and trouble-free operation of the device, the installation site
must fulfil the following requirements:
■ The device must be placed on a firm, flat and level surface.
■ Do not place the device in a hot, wet or extremely moist environ-
ment or in the vicinity of flammable materials.
■ Place the device so that it is not exposed to direct sunlight, strong
artificial light or heated air.

Controls

TREBLE control (MIN/MAX)
BASS control (MIN/MAX)
LIGHT switch (ON/OFF)
ON/OFF | VOL control (On/Off and volume control)
Loudspeakers
AUX IN socket (3.5 mm jack)
Headphone socket
Support foot
Power supply cable with USB plug
Loudspeaker cable with 3.5 mm jack plug
Operating instructions (Symbol image)
│ GB │ IE
■ 20
onto the loudspeaker guide rails from
(see fig. 1).
(3.5 mm jack)
SLB 1.2 E3