Fitting The Mounting Bracket; K�S �Ruck - Bosch KTS Truck Originalbetriebsanleitung

11. Select <Next>.
 The "Bluetooth settings" dialog window is
opened.
12. Select <Detail...>.
 The "Details of K�S �RUCK" dialog window
is opened.
13. Note down the Bluetooth device address
(MAC address).
14. Select <OK>.
 The "Details of K�S �RUCK" dialog window
is closed.
15. Close the "Bluetooth settings" dialog window.
Robert Bosch GmbH
Commissioning | K�S �ruck | 27
Entry of MAC address
1. Start ESI[tronic] 2.0.
2. Select " " (Main menu) >> Hardware settings >>
K�S �ruck".
3. Select the Bluetooth type of connection.
4. Enter the KTS Truck MAC address noted down,
00 07 80 95 30 2C
e.g.
5. Select <�est connection>.
 The KTS Truck Module ID is displayed if the con-
nection test is successful.
6. Select "K�S used".
7. Select K�S �ruck.
8. Select <OK>.
"
KTS Truck can communicate via Bluetooth with the
PC/Laptop.
4.4

Fitting the mounting bracket

The mounting bracket included in delivery is used for
fastening and removing KTS Truck from a Bosch trolley.
1. Screw the three oval head screws included in deliv-
ery into the Bosch trolley (see Fig. 4).
Fig. 4: Fitting the mounting bracket
2. Using the self-tapping screws included with delivery,
screw the mounting bracket to the KTS Truck (mount-
ing holes are provided on the back of the module).
3. Correct the penetration depth of the oval head
screws in the trolley to ensure the KTS Truck is se-
curely and firmly mounted.
en
.
|
1 689 989 100 2011-11-18