User Information; Important Notes; Safety Instructions; Electromagnetic Compatibility (Emc) - Bosch KTS Truck Originalbetriebsanleitung

2.

User information

2.1

Important notes

Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Bosch Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the KTS Truck and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found
in the separate manual "Important notes on and
safety instructions for Bosch Test Equipment". These
instructions must be carefully studied prior to start-up,
connection and operation of the KTS Truck and must
always be heeded.
2.�

Electromagnetic compatibility (EMC)

The KTS Truck satisfies the requirements of the EMC
directive 2004/108/EG.
i
The KTS Truck is a class/category A product as
defined by EN 61000-6-3. The KTS Truck may cause
high-frequency household interference (radio
interference) so that interference suppression
may be necessary. In such cases the user may be
required to take the appropriate action.
2.4

Bluetooth limitations

There are limitations in the following countries
(e. g. Bluetooth modules may only be used in enclosed
rooms) when operating Bluetooth Class 1 modules:
Egypt, France, Jordan, Pakistan, Peru, Saudi-Arabia,
Sri Lanka, Thailand and Turkey.
In the following countries, no Bluetooth modules
are to be used (Status: March 2006):
Algeria, Ethiopia, Bolivia, Burma, Georgia, Guatemala,
Cambodia, Qatar, North Korea, Senegal, South Africa,
Syria, United Arab Emirates, West Sahara.
Robert Bosch GmbH
KTS Truck and must and must
User information | K�S �ruck | 19
2.5 Important information regarding
Bluetooth
Bluetooth is a wireless connection in the unlicensed
2.4 Ghz-ISM-Band (ISM: Industrial, Scientific, Medical).
This frequency range is not subject to any governmental
laws and may be used in most countries without a
license (Exceptions are found in chap. 2.4). This results
in many applications and devices transmitting on this
frequency band however. This can cause frequency
interference between these devices.
Depending on the environmental conditions,
disturbance can occur in the Bluetooth connection,
e. g. in WLAN connections (WLAN: Wireless Local
Area Network), wireless telephones, radio-controlled
thermometers, radio-controlled garage door openers,
radio-controlled light switches or radio-controlled alarm
systems.
i
Bluetooth can lead to interference in the bandwidth
of the WLAN-network. The antennas of Bluetooth and
WLAN devices should be positioned at least
30 centimeters apart. Bluetooth-USB adapters
and WLAN must not be placed in adjacent USB
sockets in the PC/Laptop. A USB extension cable
(special accessories) should be used to ensure that
the Bluetooth-USB adapter is separate from the
WLAN stick.
i
Generally, people who wear a pacemaker or other
essential electronic device should exercise extreme
caution when using wireless technology, as it may
impair the function of their particular device.
Note the following to ensure that your connectivity is as
good as possible:
1. The Bluetooth wireless signal always looks for the
shortest path. Set up a PC/Laptop with Bluetooth
USB adapter so that there are as few obstacles,
such as e. g. steel doors and concrete walls, that
could disturbed the radio signal to and from the
KTS Truck as possible.
2. If there are problems with the Bluetooth connec-
tion, you can activate the USB connection and use it
instead of the Bluetooth connection.
3. It is not possible to operate another piece of bluetooth
hardware installed or plugged into the PC/laptop, as
the data communication between the KTS Truck and
the control unit would be disrupted as a result.
en
|
1 689 989 100 2011-11-18