Description Of Parts; Technical Data; Before Use; Operation - Silvercrest SGH 7 A1 Bedienungs- Und Sicherheitshinweise

P Description of parts
Please refer to the fold out page.
1 Adjustable headband
2 "L" and "R" markings
3 LED light effects
4 Detachable microphone
5 Volume control
6 LED light effects switch
7 USB cable
8 Instructions for use
9 2 in 1 extension cable
10 Microphone cable
11 Audio cable
12 Microphone switch
P Technical data
Weight:
Wide band characteristics
voltage (WBCV):
Current consumption
of the lighting:
Jack plug:
Operating temperature:
Operating Humidity:
Storage temperature:
Storage humidity:
Speaker
Driver size:
Impedance:
Sensitivity:
Frequency response:
Cable length:
Microphone
Element size:
Sensitivity:
The specification and design may be changed
without notification.
390 g
>75 mV
<100 mA
2 x 3.5 mm
+5 °C to +35 °C
40 to 85 % RH
-20 °C to +60 °C
40 to 75 % RH
40 mm
32 Ω ±15 %
100 dB ±3 dB
20 Hz to 20 kHz
approx. 2.5 m
6 x 5 mm
-51dB ±3 dB
P Before use
NOTE:
Before use, verify the package contents are
complete and undamaged!
All parts have to be unpacked and the
packaging material has to be removed
completely.
P Operation
˜ Putting on the headphones
The headphones can be adjusted to your
head size. Adjust the headband 1 so that the
headphones sit comfortably on your head.
NOTE:
The "L" (= left) and "R" (= right) markings 2
on the inside of the band are making it easier to
identify how to place the product correctly.
˜ Listening to music
Connect the audio cable 11 with an external
audio device.
Switch on the external audio device and set the
volume to the minimum level.
Place the headphones on your head.
Adjust the volume on your audio device and the
product volume control 5 both to achieve your
desired volume.
˜ Using the microphone
Connect the microphone cable 10 with
the desired external device and plug in the
detachable microphone 4 .
Switch on the external device and set the
volume to the desired level.
Position the microphone at the end of the
detachable microphone 4 close to your
mouth.
Switch on the microphone switch 12 to talk.
˜ LED light effects
Connect the USB cable 7 to a suitable USB
power supply device to activate the LED light
effects 6 .
GB/MT 23