Resetting the Device (only COMfortel WS-500S)
Note for COMfortel WS-500M: To reset the device, follow the steps on
page page 28.
Press the Device key on the front face to reset the base station to factory
settings. Any existing configuration and user data will then be lost.
1.
Press and hold the Device key for at least 10 seconds, until all LEDs go out.
The device is now in programming mode.
2.
Press the Device key briefly, until the two LEDs are shining blue.
3.
Press and hold the Device key for at least three seconds, but for fewer than
10 seconds.
The device is reset and restarted.
COMfortel WS-500S/500M - Instructions V01 05/2019
Appendix
35