Auerswald COMfortel WS-500S Betriebsanleitung Seite 32

Initial Commissioning
• For each physical mobile device, you must configure a mobile device in the
DECT Manager settings and assign that mobile device to the PBX profile.
– Requirements: You need to know the internal phone number with its
associated password and you also need to know the mobile device's IPUI
(for example, scan in the packaging label or battery compartment)
– Perform configuration on the Settings > Mobile devices >
Administration page in the Web configurator on the COMfortel WS-
500S/WS-500M
– Necessary settings:
IPUI
Authentication
name
Authentication
password
Username
Display name
VoIP provider
• Each mobile device must registered on the DECT Manager.
– Start by selecting Settings > Mobile devices > Administration in the
Web configurator on the COMfortel WS-500S/WS-500M. On the page that
is then displayed, click the Register now button.
– Confirmation on the mobile device
• Only COMfortel WS-500M: Each additional connected base station, found
by the DECT Manager, must be activated in the DECT Manager.
– Perform configuration on the Settings > Base stations > Administration
page in the Web configurator on the COMfortel WS-500M
Note: You will find more information in the help for the COMfortel WS-
500S/500M Web Configurator.
32
The mobile device's IPUI
The internal telephone number for the mobile
device configured on the PBX
Password for the internal telephone number
The internal telephone number for the mobile
device configured on the PBX
Name (text of your choice) that is to be
displayed on the mobile device
Previously assigned name of the PBX profile
COMfortel WS-500S/500M - Instructions V01 05/2019